MNZ材料在蜂窝吸波结构中的应用
作者:
作者单位:

南京大学电子科学与工程学院,南京 210023

作者简介:

张彪,1992年出生,硕士,主要从事电磁仿真方面的研究工作。E-mail:mg1623010@smail.nju.edu.cn

通讯作者:

顾兆栴,1963年出生,教授,主要从事电磁功能材料的设计与研制工作。E-mail:tommygu@nju.edu.cn

中图分类号:

TB333

基金项目:


Application of MNZ Material in Honeycomb Absorbing Structure
Author:
Affiliation:

School of Electronic Science and Engineering ,Nanjing University,Nanjing 210023

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    针对传统蜂窝吸波材料在低频段吸波效果差的特点,设计了一种蜂窝内壁加载回字形导线的复合吸波结构。这种回形线组合成的二维阵列本身是一种磁导率近零的频率选择表面。采用的蜂窝吸波结构高度为30 mm,吸波涂层厚度0.024 2 mm。仿真结果表明,加载回形线的复合吸波结构相较原蜂窝,在0.4~2 GHz内出现吸收峰,<-10 dB带宽增加10%~50%,并且在入射角0°~60°内具有良好的吸波稳定性。可通过调节回形线的几何参数与材料方阻,实现吸低频收峰位置与带宽的调控。

    Abstract:

    In view of the poor absorbing effect of traditional honeycomb absorbing materials at low frequency, a composite absorbing structure of honeycomb inner wall loaded with zigzag wire is designed. The two-dimensional array is a frequency selective surface with near zero permeability. The height of honeycomb absorbing structure is 30 mm and the thickness of absorbing coating is 0.024 2 mm. The simulation results show that compared with the original honeycomb, the composite absorption structure loaded with the loop line has an absorption peak in the range of 0.4 to 2 GHz, the bandwidth of < - 10 dB increases by 10% to 50%, and has good absorption stability in the range of 0° to 60 ° incidence angle. By adjusting the geometrical parameters of the loop and the square resistance of the material, the position and the bandwidth of the low-frequency peak absorption can be adjusted.

    参考文献
    相似文献
    引证文献
引用本文

张彪,陈乐,孙惠敏,顾兆栴. MNZ材料在蜂窝吸波结构中的应用[J].宇航材料工艺,2020,50(6):55-58.

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2020-05-21
  • 最后修改日期:2020-05-21
  • 录用日期:2020-05-22
  • 在线发布日期: 2021-01-15
  • 出版日期: 2020-12-30
第十一届航天复合材料成形与加工工艺技术中心交流会 征文通知

关闭