引用本文:
【打印本页】   【HTML】   【下载PDF全文】   【EndNote】   【RefMan】   【BibTex】
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被:浏览 110次   下载 63 本文二维码信息
码上扫一扫!
分享到: 微信 更多
基于视觉的模型烧蚀形貌实时测量方法
陈丁1,余奕甫1,康国剑1,陈连忠1
中国航天空气动力技术研究院,北京 100074
摘要:
针对电弧风洞试验时模型烧蚀形貌实时的变化问题,使用数字散斑相关结合双目视觉的方法直接测量得到了模型烧蚀过程的形貌变化历程。利用散斑相关来进行图像数据的处理,同时综合了亚象素相关算法。通过测量获得了模型烧蚀过程的形貌实时变化情况。标定结果表明标定精度达到了0.02 mm;试验结果表明,测量方法可以为分析平板模型随烧蚀时间变化而变化的特性提供有效的试验数据。
关键词:  烧蚀形貌测量  双目视觉  散斑相关
DOI:10.12044/j.issn.1007-2330.2019.04.017
分类号:TB89
基金项目:
A Vision-Based Method for Real-Time Measurement of Ablative Pattern
CHEN Ding1,YU Yifu1,KANG Guojian1,CHEN Lianzhong1
China Academy of Aerospace Aerodynamics,Beijing 100074
Abstract:
This paper developed a novel method which involved binocular stereo vision to measure the model ablative pattern directly regarding the ablative pattern which was under testing in the arc heated wind tunnel. This method used the speckle correlation to process the data, combined sub-pixel correlation can make the results achieve very high precision. The real planar measuring results was obtained after the test was done on a flat model.The calibrate precision of the measure system is 0.02 mm. The results verified that this method can be useful for the analysis of the model characterize related with ablative time.
Key words:  Measurement of ablative pattern  Stereo vision  Speckle correlation