引用本文:
【打印本页】   【HTML】   【下载PDF全文】   查看/发表评论  【EndNote】   【RefMan】   【BibTex】
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被:浏览 1218次   下载 835 本文二维码信息
码上扫一扫!
分享到: 微信 更多
吸波复合材料回转体构件的缠绕工艺
吴键1, 李步云1, 陈庆2, 陈亮1, 刘秀梅1
1.中国兵器工业第五九研究所, 重庆 400039;2.空军驻西南地区军事代表室, 重庆 400021
摘要:
对吸波复合材料构件的缠绕工艺特性及存在的问题进行了分析,综合现代复合材料缠绕成型工艺,针对含有吸收剂的缠绕层,提出了“双辊同槽、双线夹芯复合”的浸胶工艺制备预浸纱带,以湿法缠绕工艺制备回转体吸波复合材料构件的工艺方法。工艺特性分析表明,选用相应的缠绕规律和工艺参数能够满足不同形态的回转体构件绕制,使吸收剂在各缠绕层中均匀分布、含量可控,保证了制件的吸波性能稳定、质量可靠。
关键词:  吸波复合材料  缠绕成型  湿法缠绕  浸胶  吸收剂
DOI:10.12044/j.issn.1007-2330.2017.01.011
分类号:TQ327.1
基金项目:
Filament Winding of Microwave Absorbing Composites Cylinders
WU Jian1, LI Buyun1, CHEN Qing2, CHEN Liang1, LIU Xiumei1
1.No. 59 Institute of China Ordnance Industry, Chongqing 400039;2.The Military Affairs Representative Office Stationed Southwest Region of Airforce, Chongqing 400021
Abstract:
Based on modern filament winding technology, processing property and puzzles are analyzed for the microwave absorbing composites cylinders. For winding layer including absorbers, a technique is adopted, which prepreg is prepared using double rolls for the same slot and double lines sandwich core, and absorbing composites cylinders are manufactured through wet filament winding. The results show the winding rules and the processing parameters can meet cylinders manufacture. The content of absorbers dispersed in the different prepreg well-proportioned can be controlled,and the microwave absorbing performance is excellent.
Key words:  Microwave absorbing composites  Filament winding  Wet winding  Gumming  Absorber