非热压罐成型低孔隙率复合材料技术研究进展
DOI:
作者:
作者单位:

(中国航空工业集团公司济南特种结构研究所,高性能电磁窗航空科技重点实验室,济南 250023)

作者简介:

杨茂伟,1983年出生,高级工程师,主要从事复合材料工艺研究工作。E-mail:sduymw@163.com

通讯作者:

中图分类号:

V258+.3

基金项目:


Research Progress of Out of Autoclave Technology for Low Porosity Composite
Author:
Affiliation:

(The Aeronautical Science Key Lab for high Performance Electromagnetic Windows,Research Institute for Special Structure of Aeronautical Composite,AVIC,Jinan 250023)

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    介绍了非热压罐成型(OOA)低孔隙率复合材料技术的研究进展,详细阐述了OOA预浸料、OOA树脂再到OOA预浸料增强材料等对复合材料孔隙的影响,分析了OOA预浸料固化过程中影响孔隙的典型物理现象,以及各种制造工艺条件和参数等对孔隙率的影响,并提出了控制OOA复合材料孔隙率的方法和建议。

    Abstract:

    In this paper, research progress of out of autoclave(OOA) composite technology for low porosity composite was reviewed. We presented the influence of OOA materials properties including prepreg, resin and reinforcements on porosity of OOA composite, then, phenomena that affect porosity during curing were analyzed.Afterward, the relationships between porosity of OOA composite and manufacturing process conditions and parameters were also described. Finally, some suggestions on reducing porosity of OOA composite were proposed.

    参考文献
    相似文献
    引证文献
引用本文

杨茂伟,刘建,刘振濮,王志强.非热压罐成型低孔隙率复合材料技术研究进展[J].宇航材料工艺,2016,46(6):21-25.

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2016-05-23
  • 最后修改日期:2016-05-23
  • 录用日期:
  • 在线发布日期: 2016-12-28
  • 出版日期:
第十一届航天复合材料成形与加工工艺技术中心交流会 征文通知

关闭